Mounting The Isr 9024 In The Rack; The Isr 9024 Rack Kit - HP Cluster Platform Interconnects v2010 User Manual

8. Open the small box and verify its contents against the packing list as follows. Some parts
are optional, and might not be included in all shipments:
a. Verify that the chassis is the correct configuration; internally managed or externally
managed.
b. Identify the rail kit consisting of:
1.
2.
c. If an internally managed unit, verify that a management cable adapter is present.
d. At least one power cable, depending on the configuration.
e. A documentation CD containing ISR 9024 documentation.
f. Quick start documentation.
Note:
For Cluster Platform, refer only to the HP documentation for installation and
configuration instructions.
Perform the preceding steps in reverse order to repack a chassis for shipping, ensuring that the
chassis is secure in the shock-absorbing materials. Do not reuse any damaged packaging, contact
your HP sales and service representative if you are unsure about return shipping requirements.

2.3 Mounting the ISR 9024 in the Rack

You mount the ISR 9024 interconnect with its ports facing towards the rear of the rack.
shows the mounting kit in use.
Figure 2-5 The ISR 9024 Rack Kit
4
Use the following procedure to mount the chassis in the rack:
1. If you are replacing an interconnect chassis, bring the cluster to an appropriate state, as
described in the operating environment documentation. HP recommends that you power
up the chassis before installing it in the rack to ensure that all status LEDs indicate that
components and ports function correctly.
34 Installing and Maintaining the ISR 9024 Interconnect
Four angle brackets.
Two chassis-mounted rails.
2
3
1
Figure 2-5