Accessing The Setup Program - Toshiba 100CS Manual

3.23.2

Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the following:
MEMORY
Total
Base
Extended
Shadow BIOS ROM
DISPLAY
Display Adapter
LCD Display Mode
VGA Segment Address= E000H
LCD Display Colors = 222K Colors
Power On Display
Text Mode Stretch
HARD DISK
HARD DISK
HDD Mode = Enhanced IDE (Normal)
POWER ON PASSWORD
Not Registered
↑↓→← :
Select items, Space, BkSp : Change values
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTES: 1. The Panel Power On/Off item appears only when the computer is in
Resume mode.
2. The Battery Level item appears only when a battery is installed.
Moving Within the SETUP Menu and Changing Values
Press ← and → to move between the two columns. Press ↑ and ↓ to move be-
1.
tween items in a column.
Press either the space bar or BkSp to change the value.
2.
Accepting Changes and Exiting the SETUP Window
Press End to accept the changes you made.
1.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is dis-
played:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
3-50
SYSTEM SETUP
= 8192 KB
= 640 KB
= 7360 KB
= 192 KB
= VGA compatible
= Color
= Internal/External
= Enabled
BIOS version = x.xx
I/O PORTS
Serial Port = COM1(IRQ4/3F8H)
Parallel Port = LPT1 (378H)
OTHERS
Power-up Mode = Resume
CPU Cache = Enabled
Battery Save Mode = Full Power
Battery Level = E
Alarm Volume = High
System Beep = Enabled
Panel Power On/Off = Disabled
Alarm Power On = Disabled
Keyboard = Layout/Fn
Pointing Devices = Auto-selected
Boot Priority = FDD
F
HDD
100CS