Accessing The Setup Program - Toshiba 430CDT Maintenance Manual

3.25.2

Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the following:
MEMORY
Total = 16384 KB
Base =
Extended = 15552 KB
Shadow BIOS ROM =
DISPLAY
Display Adapter = VGA compatible
LCD Display Mode = Color
VGA Segment Address= E400H
LCD Display Colors = 16M Colors
Power On Display = Internal/External
Text Mode Stretch = Enabled
HARD DISK HARD DISK
HDD Mode = Enhanced IDE (Normal)
POWER ON PASSWORD
Not Registered
↑ ↓ → ← : Select items, Space, BkSp : Change values ↑ ↓ → ←
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTES:
1. The Panel Power On/Off item appears only when the computer is in Resume mode.
2. The 430CDS "LCD Display Colors" options are 222k and 4096 colors.
3.25.3 Moving Within the SETUP Menu and Changing Values
Press → → and ← ← to move between the two columns. Press ↑ ↑ and ↓ ↓ to move be-
1.
tween items in a column.
2. Press either the space bar or BkSp to change the value.
3.25.4 Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message
is displayed:
If the changed item requires the system to reboot, the following message is dis-
played:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
3-54
SYSTEM SETUP
Serial Port
640 KB
Infrared Port =
Parallel Port =
192 KB Sound System
Are you sure? (Y/N)
BIOS version = x.xx
I/O PORTS
= COM1(3F8H/IRQ4)
Not Used
LPT1(378H/IRQ7/CH3)
= Address/IRQ/DMA
OTHERS
Power-up Mode = Resume
CPU Cache = Enabled
Battery Save Mode = Full Power
Alarm Volume = High
System Beep = Enabled
Panel Power On/Off = Disabled
Alarm Power On = Disabled
Keyboard = Layout/Fn
Pointing Devices = Auto-selected
Boot Priority = FDD→HDD
430 Series