Cos Interface Configuration - NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual

GS700AT Smart Switch Software Administration Manual
The CoS Global Configuration screen contains the following:
• QoS Mode – Select whether QoS is enabled or disabled on the device. The possible values
are:
– Enable – Enable QoS globally.
– Disable – Disable QoS globally.
• Trust Mode – Select which packet fields to use for classifying packets entering the
device. The possible Trust Mode field values are:
– CoS – Classify traffic based on the CoS (VPT) tag value.
– DSCP – Classify traffic based on the DSCP tag value.
2. Select the QoS Mode and Trust Mode in the provided fields.
3. Click APPLY to update the device.

CoS Interface Configuration

The CoS Interface Configuration screen contains information for configuring the default CoS
value on a selected interface. After CoS has been configured, the device original CoS default
settings can be reassigned to the interface in the CoS Interface Configuration screen.
To configure CoS interface parameters:
1. Click QoS > CoS > Basic > CoS Interface Configuration. The CoS Interface Configuration
screen displays:
Figure 5-2
5-3
v1.0, October 2008
Configuring QoS