Factory Default - NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual

GS700AT Smart Switch Software Administration Manual
To reset the device:
1. Click Maintenance > Reset > Device Reboot. The Device Reboot screen displays:
Figure 8-1
2. Check the confirmation box.
3. Click APPLY to reboot the device.

Factory Default

The Factory Default screen allows network managers to reset the device to the factory defaults
shipped with the switch. Restoring factory defaults results in erasing the configuration file.
Note: Selecting this option automatically reboots the device.
To reset the device to the factory defaults:
1. Click Maintenance > Reset > Factory Default. The Factory Default screen displays:
Figure 8-2
2. Check the confirmation box.
3. Click APPLY to reset the device to the factory defaults.
8-2
v1.0, October 2008
Maintenance