NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 47

View Content
SNMP views provide or block access to device features or portions of features. For example, a
view can be defined to provide a view that SNMP group A has Read Only (R/O) access to
Multicast groups, while SNMP group B has Read-Write (R/W) access to Multicast groups. Feature
access is granted via the MIB name or MIB Object ID.
To define the SNMP View Content:
1. Click System > SNMP > SNMPv3 > View Content. The SNMPv3 View Content screen
displays:
Figure 3-10
The SNMPv3 View Content screen contains the following fields:
Views
• View Name – Select the user-defined view name. The view name can contain a maximum
of 30 alphanumeric characters.
• Object ID Subtree – Enter the device feature OID.
• View Type – Select whether the defined OID branch will be included in or excluded from
the selected SNMP view. The possible field values are:
– Included – The OID is included in the SNMP view.
– Excluded – The OID is excluded from the SNMP view.
2. Select the View Name from the list in the provided field in the Views table.
3. Enter the Object ID Subtree in the provided field in the first row.
4. Select either Included or Excluded from the View Type provided field in the first row.
Managing System Settings
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
3-38