NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 94

GS700AT Smart Switch Software Administration Manual
3. Enter the VLAN ID and VLAN Name in the provided fields in the first row.
4. Click APPLY to update the device.
To add a new VLAN:
1. Click Switching > VLAN > Advanced > VLAN Configuration. The Advanced VLAN
Configuration screen displays.
2. Enter the VLAN ID and VLAN Name in the provided fields in the first row.
3. Click ADD to update the device.
To remove a VLAN:
1. Click Switching > VLAN > Advanced > VLAN Configuration. The Advanced VLAN
Configuration screen displays.
2. Select the VLAN entry.
3. Click DELETE to remove the entry.
VLAN Membership
The VLAN Membership screen contains a table that maps ports to VLANs. Ports are assigned
VLAN membership by toggling through the Port Control settings.
To define VLAN group membership:
1. Click Switching > VLAN > Advanced > VLAN Membership. The VLAN Membership
screen displays:
Figure 4-12
4-17
v1.0, October 2008
Configuring Switching Settings