NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 148

GS700AT Smart Switch Software Administration Manual
– Enable – Enable using a Guest VLAN for unauthorized ports. If a Guest VLAN is
enabled, the unauthorized port automatically joins the VLAN selected in the VLAN
List field.
• Guest VLAN ID – Select the guest VLAN ID from the list of currently defined VLANs.
2. Select Disable or Enable for the Port Based Authentication State in the provided field.
3. If you selected Enable for the Port Based Authentication State, then select the
Authentication Method from the list in the provided field.
4. Select Disable or Enable for the Guest VLAN status in the provided field.
5. If you selected Enable for the Guest VLAN field, then select the VLAN ID from the list in the
provided field.
6. If you selected Disable for the Port Based Authentication State, select the EAPOL
Handling mode in the provided field.
7. Click APPLY to update the device.
Port Authentication
The Port Authentication screen enables configuring port authentication interface parameters.
To configure port-based authentication global properties:
1. Click Security > Port Authentication > Advanced > Port Authentication. The Port
Authentication screen displays
Figure 6-8
6-12
v1.0, October 2008
Managing Security