Default Settings - NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual

This appendix provides default settings for the NETGEAR Model GS700AT Smart Switch. You
can always configure the switch to default settings by using the Factory Reset function from a Web
browser.
Table 1:

Default Settings

Feature
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
IP Configuration
Password
VLAN
Link Aggregation (Trunk)
Traffic Prioritization (QoS)
GS700AT Default Setting
Auto-negotiation
Auto-negotiation
Disabled
Disabled
DHCP enabled
password
802.1q based VLAN
Disabled
Optimized for flow control, all ports set normal priority
v1.0, October 2008
Appendix A
Default Settings
A-1