NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 118

GS700AT Smart Switch Software Administration Manual
2. Select the IGMP Snooping Status and Bridge Multicast Filtering Status in the provided
fields.
3. Click APPLY to update the device.
To configure IGMP Snooping on a VLAN:
1. Click Switching > Multicast > Advanced > IGMP Snooping Configuration. The Advanced
IGMP Snooping Configuration screen displays.
2. Select the VLAN ID entry in the Interface Settings table.
3. Select the Status and Auto Learn status from the lists in the provided fields in the first row.
4. Enter the Host, MRouter and Leave Timeouts in the provided fields in the first row.
5. Click APPLY to update the device.
Multicast Group Configuration
The Multicast Group Configuration screen allows you to create, delete and modify Multicast
service groups. The Multicast Group Configuration table can contain up to 32 Multicast service
groups.
To configure Multicast groups:
1. Click Switching > Multicast > Advanced > Multicast Group Configuration. The Multicast
Group Configuration screen displays:
Figure 4-27
The Multicast Group Configuration screen contains the following information:
• VLAN ID – Displays the VLAN ID.
• VLAN Name – Displays the user-defined VLAN name.
• Multicast Address – Enter the Multicast group MAC Address associated with the VLAN.
4-41
v1.0, October 2008
Configuring Switching Settings