NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 36

GS700AT Smart Switch Software Administration Manual
To define an IP interface:
1. Click System > Management > IP Configuration. The IP Configuration screen displays:
Figure 3-2
The IP Configuration screen contains the following fields:
• Dynamic IP Address (DHCP) – Enable the IP address to be configured automatically by
the DHCP server. Selecting this field disables the IP Address, Subnet Mask, Gateway
and Delete fields.
• Static IP Address – Enable the user to define a static IP address.
• IP Address – Enter the static IP address used to manage the device.
• Subnet Mask – Enter the IP address mask.
• Gateway – Enter the default gateway IP address. The following option is available:
– Delete – Delete the default gateway IP address.
2. Select the method of assigning the IP address by selecting either Dynamic IP Address or
Static IP Address.
3. If you selected Static IP Address, enter the IP Address, Subnet Mask and Gateway address.
4. Click APPLY to update the system settings.
Time
The Time menu enables local system time or SNTP server configuration, and contains the
following options:
• "Time Configuration"
• "SNTP Server Configuration"
3-27
v1.0, October 2008
Managing System Settings