NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 69

To configure LLDP-MED port settings:
1. Click System > LLDP > Advanced > LLDP-MED Port Settings. The LLDP-MED Port
Settings screen displays:
Figure 3-22
The LLDP-MED Port Settings screen contains the following fields:
• Port – Select the port to configure.
• LLDP-MED Status – Select the LLDP-MED status for the selected port. The possible
field values are:
– Enable – Enable LLDP-MED on the selected port.
– Disable – Disable LLDP-MED on the selected port.
• Notification – Select the notification status for the selected port. The possible field values
are:
– Enable – Enable notification on the selected port.
– Disable – Disable notification on the selected port.
• Network Policies – Click on the gold button to select the network policy numbers to apply
to the selected port.
2. Select the Port from the list in the provided field.
3. Select the LLDP-MED Status of the selected port from the list in the provided field.
4. Select the Notification Status of the selected port from the list in the provided field.
Managing System Settings
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
3-60