NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 77

• Serial Number – Displays the device serial number.
• Model Name – Displays the device model name.
• Asset ID – Displays the asset ID.
Location Information
• Civic – Displays the device's civic or street address location. For example, 123 45th St E.
The field value length range is 6 - 160 characters.
• Coordinates – Displays the device's location map coordinates - latitude, longitude and
altitude.
• ECS ELIN – Displays the device's Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN). The field range is 10 - 25.
• Unknown – Displays unknown location information.
Network Policies
• Application Type – Displays the network policy application type. For example, Voice.
• VLAN ID – Displays the VLAN ID for which the network policy is defined.
• VLAN Type – Displays the VLAN type for which the network policy is defined. The
possible field values are:
– Tagged – The network policy is defined for tagged VLANs.
– Untagged – The network policy is defined for untagged VLANs.
• User Priority – Displays the network policy user priority.
• DSCP – Displays the network policy DSCP.
LLDP Unknown TLVs
• Type – Displays the unknown TLV type field.
• Value – Displays the unknown TLV value field.
3. Click the Network Policies gold bar to display the network policies applied to the MSAP
entry.
4. Click the LLDP Unknown TLVs gold bar to display the MSAP entry's unknown TLVs.
Managing System Settings
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
3-68