NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 75

To view LLDP Neighbors detailed information:
1. Click System > LLDP > Advanced > Neighbors Information. The LLDP Neighbors
Information screen displays.
2. Click the MSAP Entry to view its detailed information. The Neighbors Information window
opens:
The Neighbors Information window contains the following fields:
Port Details
• Local Port – Displays the port number.
• MSAP Entry – Displays the device's Media Service Access Point (MSAP) entry number.
Basic Details
• Chassis ID Subtype – Displays the chassis ID subtype. For example, MAC address.
• Chassis ID – Displays the chassis identification of the device transmitting the LLDP
frame.
• Port ID Subtype – Displays the port ID subtype. For example, IPv4 address.
• Port ID – Displays the port identification of the port transmitting the LLDP frame.
• Port Description – Displays information about the port, including manufacturer, product
name and hardware/software version.
• System Name – Displays the administratively assigned device name.
• System Description – Describes the device. For example, system hardware type and
version, operating system and network software.
• System Capabilities – Describes the primary device function. For example: Bridge,
Router.
Managed Address
• Address Subtype – Displays the managed address subtype. For example, MAC or IPv4.
• Address – Displays the managed address.
• Interface Subtype – Displays the port subtype.
• Interface Number – Displays the port number.
MAC/PHY Details
• Auto-Negotiation Supported – Displays the port speed auto-negotiation support status.
The possible values are:
Managing System Settings
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
3-66