NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 90

GS700AT Smart Switch Software Administration Manual
3. Click APPLY to update the device.
LACP Port Configuration
To configure LACP port priority:
1. Click Switching > LAG > Advanced > LACP Port Configuration. The LACP Port
Configuration screen displays:
Figure 4-9
The LACP Port Configuration screen contains the following fields:
• Interface – Displays the interface number to which timeout and priority values are
assigned.
• LACP Priority – Enter the port priority value. The field range is 1-65535.
• Timeout – Select the administrative LACP timeout. The possible field values are:
– Long – A long timeout value (90 seconds). This is the default.
– Short – A short timeout value (3 seconds).
2. Select the interface.
3. Enter the LACP Priority and select the Timeout in the provided fields in the first row.
4. Click APPLY to update the device.
4-13
v1.0, October 2008
Configuring Switching Settings