NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 100

GS700AT Smart Switch Software Administration Manual
Properties
The Voice VLAN Advanced Properties screen contains information about Voice VLAN on the
device, including the ports enabled and included in the Voice VLAN.
To define Voice VLAN settings:
1. Click Switching > Voice VLAN > Advanced > Properties. The Voice VLAN Advanced
Properties screen displays:
Figure 4-17
The Voice VLAN Advanced Properties screen contains the following fields:
• VoiceVLAN Status – Select the Voice VLAN status on the device. The possible field
values are:
– Enable – Enable Voice VLAN on the device.
– Disable – Disable Voice VLAN on the device. This is the default value.
• VoiceVLAN ID – Select the Voice VLAN ID number.
• Class of Service – Select a CoS tag to add to untagged packets received on the voice
VLAN. The possible field values are 0-7, where zero is the lowest priority, and seven is
the highest priority.
• Remark CoS – Enable or disable reassigning the CoS tag value to packets received on the
voice VLAN. The possible field values are:
– Disable – Disable remarking the packet CoS tag value. This is the default value.
– Enable – Enable remarking the packet CoS tag value.
4-23
v1.0, October 2008
Configuring Switching Settings