NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 141

To configure RADIUS Accounting Servers:
1. Click Security > Management Security > RADIUS > Accounting Server Configuration.
The RADIUS Accounting Server Configuration screen displays:
Figure 6-3
The RADIUS Accounting Server Configuration screen contains the following fields:
• Accounting Mode – Select the RADIUS accounting method. The possible field values
are:
– None – RADIUS accounting is disabled. This is the default.
– 802.1x – 802.1X authentication sessions are recorded.
– Login – Device management (Web login and logout) sessions are recorded.
– Both – Both 802.1X authentication and device management sessions are recorded.
• Accouting Server Address – Select the RADIUS Accounting Server IP address.
• Accounting Port – Enter the RADIUS Accounting port number. The accounting port is
used to handle RADIUS server accounting. The field default is 1813.
2. Select the RADIUS Accounting Mode from the list in the provided field.
3. Select the RADIUS Accounting Server Address from the list in the provided field.
4. Enter the RADIUS Accounting Port in the provided field.
5. Click APPLY to update the device.
Managing Security
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
6-5