NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 120

GS700AT Smart Switch Software Administration Manual
Multicast Group Membership
• VLAN ID – Enter the VLAN ID.
• VLAN Name – Displays the user defined VLAN name.
• Multicast Address – Enter the Multicast group MAC address/IP address.
Multicast Group
• Interface – Displays the ports and LAGs for which the Multicast settings are displayed.
• Interface Status – Select the interface status. The possible field values are:
– Static – The interface is joined to the Multicast group statically.
– Forbidden – The interface is forbidden to join the Multicast group.
– Excluded – The interface is not included in the Multicast group.
2. Select the VLAN ID from the list in the provided field.
3. Select the Multicast Address from the list in the provided field.
4. Select the interface entry in the Multicast Group table.
5. Select the Interface Status from the list in the provided field in the first row.
6. Click APPLY to update the device.
Multicast Forward All
The Multicast Forward All screen contains fields for attaching ports or LAGs to a device that is
attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast
packets are forwarded only to the appropriate port or VLAN.
4-43
v1.0, October 2008
Configuring Switching Settings