NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 44

GS700AT Smart Switch Software Administration Manual
To add a new SNMP trap:
1. Click System > SNMP > SNMPv1/v2 > Trap Configuration. The SNMPv1/v2 Trap
Configuration screen displays.
2. Enter the fields in the first row.
3. Click ADD to update the device.
To remove an SNMP trap:
1. Click System > SNMP > SNMPv1/v2 > Trap Configuration. The SNMPv1/v2 Trap
Configuration screen displays.
2. Select the entry to be removed.
3. Click DELETE to remove the entry.
SNMPv3
The SNMPv3 menu contains the following options:
• "Engine ID"
• "View Name"
• "View Content"
• "Community Configuration"
• "Group Configuration"
• "User Configuration"
• "Global Trap Configuration"
• "Trap Configuration"
• "Trap Filter Name"
• "Trap Filter Content"
3-35
v1.0, October 2008
Managing System Settings