NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 179

2. Select the history control entry.
3. Enter the Source Interface, Sampling Interval, Samples Requested and Owner in the
provided field in the first row.
4. Click APPLY to update the device.
To add a history control entry:
1. Click Monitoring >RMON > Advanced > History Control. The RMON History Control
screen displays.
2. Enter the Source Interface, Sampling Interval, Samples Requested and Owner in the
provided field in the first row.
3. Click ADD to update the device.
To remove a history control entry:
1. Click Monitoring >RMON > Advanced > History Control. The RMON History Control
screen displays.
2. Select the history control entry.
3. Click DELETE to remove the history control entry.
History Table
The RMON History Table screen contains interface specific statistical network samples. Each
table entry represents all counter values compiled during a single sample.
To view the RMON History Table:
1. Click Monitoring > RMON > Advanced > History Table. The RMON History Table screen
displays:
Figure 7-9
Monitoring the Switch
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
7-15