NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 119

GS700AT Smart Switch Software Administration Manual
• Type – Indicates the VLAN ID status in relation to the Multicast group.
– Static – Attaches the VLAN ID to the Multicast group as static member.
– Dynamic – Dynamically joins the VLAN ID to the Multicast group.
2. Select the group entry.
3. Enter the Multicast Address in the provided field in the first row.
4. Click APPLY to update the device.
Multicast Group Membership
The Multicast Group Membership screen displays the ports and LAGs attached to the selected
VLAN and the Multicast service group. The Port and LAG tables also reflect the manner in which
the port or LAGs joined the Multicast group.
To configure Multicast group membership:
1. Click Switching > Multicast > Advanced > Multicast Group Membership. The Multicast
Group Membership screen displays:
Figure 4-28
The Multicast Group Membership screen contains the following information:
Configuring Switching Settings
v1.0, October 2008
4-42