NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 41

To configure SNMP communities:
1. Click System > SNMP > SNMPv1/v2 > Community Configuration. The Community
Configuration screen displays:
Figure 3-6
The SNMPv1/v2 Community Configuration screen contains the following fields:
• Management Station IP – Enter the management station IP address for which the Basic
SNMP community is defined.
• Management Station IP Mask – Enter the management station IP mask for which the
Basic SNMP community is defined.
• Community String – Enter the SNMP community string used to authenticate the
management station to the device.
• Access Mode – Select the access rights of the community. The possible field values are:
– Read Only – Management access is restricted to read-only. Changes cannot be made
to the device configuration and to the community.
– Read Write – Management access is read-write. Changes can be made to the device
configuration but not to the community.
– SNMP Admin – User has access to all device configuration options, as well as
permissions to modify the community.
2. Select the community entry.
3. Enter the Management Station and Community String in the provided fields in the first row.
4. Select the Access Mode from the list in the provided field in the first row.
5. Click APPLY to update the device.
Managing System Settings
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
3-32