NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 174

GS700AT Smart Switch Software Administration Manual
To view RMON Basic Statistics:
1. Click Monitoring > RMON > Basic > Statistics. The RMON Basic Statistics screen
displays:
Figure 7-6
The RMON Basic Statistics screen contains the following fields:
• Interface – Displays the port or LAG for which statistics are displayed.
• Drop Events – Displays the number of dropped events that have occurred on the interface
since the device was last refreshed.
• Received Bytes – Displays the number of octets received on the interface since the device
was last refreshed. This number includes bad packets and FCS octets, but excludes
framing bits.
• Received Packets – Displays the number of packets received on the interface, including
bad packets, Multicast, and Broadcast packets, since the device was last refreshed.
• Broadcast Packets Received – Displays the number of good broadcast packets received
on the interface since the device was last refreshed. This number does not include
Multicast packets.
• Multicast Packets Received – Displays the number of good Multicast packets received
on the interface since the device was last refreshed.
• CRC & Alignment Errors – Displays the number of CRC and Align errors that have
occurred on the interface since the device was last refreshed.
2. Click REFRESH or CLEAR ALL COUNTERS to refresh or reset the RMON Basic
Statistics screen.
7-10
v1.0, October 2008
Monitoring the Switch