NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 181

• Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
• Utilization – Displays the percentage of the interface utilized.
2. Select the History Entry No. from the list in the provided field. The statistics are displayed.
3. To refresh the RMON History Table screen, click REFRESH.
Events Control
The RMON Events Control screen contains fields for defining RMON events.
To configure RMON events control:
1. Click Monitoring > RMON > Advanced > Events Control. The RMON Events Control
screen displays:
Figure 7-10
The RMON Events Control screen contains the following fields:
• Event Entry Interface – Displays the event.
• Community – Enter the community to which the event belongs.
• Description – Enter the user-defined event description.
• Type – Select the event type. Possible values are:
– None – No event has occurred.
– Log – The event is a log entry.
– Trap – The event is a trap.
– Log & Trap – The event is both a log entry and a trap.
• Time – Displays the time that the event occurred.
Monitoring the Switch
GS700AT Smart Switch Software Administration Manual
v1.0, October 2008
7-17