NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 115

GS700AT Smart Switch Software Administration Manual
packets and Multicast traffic. A port requesting to join a specific Multicast group issues an IGMP
report specifying that Multicast group. This results in the creation of the Multicast filtering
database.
To configure Basic IGMP Snooping:
1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP
Snooping Configuration screen displays:
Figure 4-25
The Basic IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
• IGMP Snooping Status – Select the IGMP Snooping status on the device. The possible
field values are:
– Enable – Enable IGMP Snooping on the device.
– Disable – Disable IGMP Snooping on the device.
Interface Settings
• VLAN ID – Displays the VLAN ID.
• Status – Select the IGMP Snooping status on the VLAN. The possible field values are:
– Enable – Enable IGMP Snooping on the VLAN.
– Disable – Disable IGMP Snooping on the VLAN.
2. Select the IGMP Snooping Status in the provided field.
3. Click APPLY to update the device.
Configuring Switching Settings
v1.0, October 2008
4-38