NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 82

GS700AT Smart Switch Software Administration Manual
• "LAG Membership"
LAG Configuration
The Basic LAG Configuration screen contains fields for configuring LAG parameters. The system
supports 8 LAGs, and each LAG can contain up to 8 ports.
To define LAG parameters:
1. Click Switching > LAG > Basic > LAG Configuration. The Basic LAG Configuration
screen displays:
Figure 4-2
The Basic LAG Configuration screen contains the following fields:
• Interface – Displays the LAG number.
• Description – Enter a user-defined LAG description.
• Status – Select the current link operation. The possible field values are:
– Up – The LAG is currently linked and forwarding traffic.
– Down – The LAG is currently not linked.
• Reactivate Suspended – Select the action to apply to a suspended LAG. The possible
field values are:
– Enable – Reactivate the suspended LAG.
– Disable – Do not reactivate the suspended LAG.
• Type – Displays the LAG type. The possible field values are:
4-5
v1.0, October 2008
Configuring Switching Settings