NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 125

GS700AT Smart Switch Software Administration Manual
• Status – Select the MAC Address duration period within the table. The possible field
values are:
– Permanent – The MAC address is permanent.
– Delete on Reset – The MAC address is deleted when the device is reset.
– Delete on Timeout – The MAC address is deleted when the Address Aging Interval
expires.
– Secure – The MAC Address is defined for locked interfaces.
2. Select the address table entry.
3. Enter the MAC Address and Interface in the provided fields in the first row.
4. Select the MAC Address duration period Status from the list in the provided field in the first
row.
5. Click APPLY to update the device.
Dynamic Addresses
The Dynamic Addresses screen contains information about the aging time before a dynamic MAC
address is erased.
To configure the Dynamic MAC Address table:
1. Click Switching > Address Table > Advanced > Dynamic Addresses. The Dynamic
Addresses screen displays:
Figure 4-32
The Dynamic Addresses screen contains the following field:
• Address Aging – Enter the amount of time the MAC address remains in the Dynamic
MAC Address table before it is timed out if no traffic from the source is detected. The
range is 10 - 630 seconds. The default value is 300 seconds.
Configuring Switching Settings
v1.0, October 2008
4-48