NETGEAR GS748AT - ProSafe Gigabit Smart Switch Administration Manual page 101

GS700AT Smart Switch Software Administration Manual
• Voice VLAN Aging Time – Enter the Voice VLAN aging time. The Voice VLAN aging
time sets the maximum inactivity time for a Voice VLAN port member after its MAC
address is aged out. If the time since the last MAC address with telephony MAC address
was aged out exceeds the Voice VLAN aging time, the port is dropped from the voice
VLAN. The default time is one day. The field format is Day, Hour, Minute. The aging
time starts after the MAC Address is aged out from the Dynamic MAC Address table. The
default time is 300 sec. For more information on defining MAC address age out time, see
"Dynamic Addresses".
2. Select the device VoiceVLAN Status in the provided field.
3. If you selected Enable in the VoiceVLAN Status field, select the VoiceVLAN ID, Class of
Service, Remark CoS and enter the Voice VLAN Aging Time in the provided fields.
4. Click APPLY to update the device.
Port Setting
The Voice VLAN Port Setting screen allows network managers to add ports or LAGs to the voice
VLAN.
To add ports or LAGs to the Voice VLAN:
1. Click Switching > Voice VLAN > Advanced > Port Setting. The Port Setting screen
opens:
Figure 4-18
The Voice VLAN Port Setting screen contains the following fields:
• Interface – Displays the interface for which the Voice VLAN settings are applied.
• Voice VLAN Mode – Select the Voice VLAN mode. The possible field values are:
Configuring Switching Settings
v1.0, October 2008
4-24