1200-1299, Modem Communications Test Error Codes; Modem Communications Test Error Codes; 6000-6099, Compaq Nic Boards Test Error Codes; Compaq Network Interface Boards Test Error Codes - Compaq PROLIANT ML370 Maintenance And Service Manual

3-32 Compaq ProLiant ML370 Maintenance and Service Guide

1200-1299, Modem Communications Test Error Codes

The 1200 series of diagnostic error codes identifies failures with the modem.
Error Code
1201-xx
1202-xx
1203-xx
1204-xx
1206-xx
1210-xx

6000-6099, Compaq NIC Boards Test Error Codes

The 6000 series of diagnostic error codes identifies failures with various Compaq Network
Interface Controllers.
Error Code
6000-xx
6001-xx
6002-xx
6014-xx
6016-xx
6028-xx
6029-xx
6089-xx
6090-xx
6091-xx
6092-xx

Modem Communications Test Error Codes

Description
Modem internal loopback test
failed.
Modem time-out test failed.
Modem external termination test
failed.
Modem auto originate test failed.
Dial multi-frequency tone test
failed.
Modem direct connect test failed.

Compaq Network Interface Boards Test Error Codes

Description
Network card ID failed.
Network card setup failed.
Network card transmit failed.
Network card configuration failed.
Network card reset failed.
Network card internal failed.
Network card external failed.
Network card open failed.
Network card initialization failed.
Network card internal loopback failed.
Network card external loopback failed.
Table 3-10
Recommended Action
1. Refer to the modem documentation for correct
setup procedures and retest.
2. Check the modem line and retest.
3. Replace the modem and retest.
Table 3-11
Recommended Action
1. Check the controller installation in the slot.
2. Check the interrupt type and the number
setting.
3. Check the media connection at the
controller and Multistation Access Unit
(MAU).
4. Check the media speed (4/16) and type
Unshielded Twisted Pair/Shielded Twisted
Pair (UTP/STP) settings.
5. Check the MAU, cabling, or other network
components.
6. Replace the controller.