Remote Control Shortcut Keys; Password Protection - TANDBERG MXP F8 Administrator's Manual

MXP
About Control Panel
Contents Introduction
About the Control Panel
The different parts of the Control Panel are explained on the
following pages.
The menu structure section presents all the Control Panel menus
by product. This section applies to:
•
TANDBERG Edge 95/85/75 MXP
•
TANDBERG 990/880/770 MXP

Password Protection

Making changes to the Control Panel Settings will change the
behavior of the system. We recommend password protecting the
access to the Control Panel Settings to prevent occasional users
from making crucial changes to the system. Set an Administrator
Password to control the access to these settings.
Read more about password protection in the
section.

Remote control shortcut keys

RE-DIAL: Double click on the green call button on the
remote control to start calling the last number.
STANDBY: Double click on the red end call button on
the remote control to set the system into standby.
SHOW SYSTEM INFORMATION: Open the call menu
and press the arrow up key once to show the System
information page.
RESET MENU LANGUAGE: Click on the Phone Book
button 5 times and then press the number key 1 to
reset the menu language to English.
D14033.06—AUGUST 2010
Getting started The menu structure The menu structure
Open the Control Panel
Press the OK
and to display the
Using the system
The settings library Using the system
key on the remote control to wake up the system,
Call menu.
Physical interfaces Peripheral equipment
In the Call menu, use the arrow keys on the remote
control to navigate to the Control Panel button
press the OK key to display the Control Panel.
BACK
RESTART (the system switches itself Off and On again)
AUDIO DEMO (demonstrates the audio of the system)
DIAGNOSTICS (see the system status and warnings))
ON-LINE USER GUIDE (open the online user guide).
Each menu item is described in
The settings library section.
Administrator Guide
Appendices Contact us
and
116