TANDBERG MXP F8 Administrator's Manual page 20

MXP
Contents Introduction
The Installation Wizard
The Installation Wizard starts automatically when the video system is
installed at the first time and guides you through the basic configuration
of the system in the following steps:
1. Welcome page
2. Select Language
3. Enter System Name
4. Enter Software Option Keys
5. Enter IP Settings
•
Obtain IP Address Automatically
•
Static IP Address (address, subnet, gateway)
6. Enter SIP Settings
7. Enter External Management settings
•
On: Enter information for your TMS server
•
Off: Select from the list:
•
Gatekeeper and enter the gatekeeper settings
•
Call Manager and enter the call manager settings
•
Direct
8. Finish the wizard. The system will automatically
The Installation Wizard can be run any time from the Control Panel
menu.
Description of the settings
Each setting is described in in The settings
Press The settings library menu button on top of
the page to go the settings library or use the search
functionality in the Adobe Acrobat PDF document to
make a search for the setting.
D14033.06—AUGUST 2010
Getting started Getting started The menu structure

(address, path)
restart the system.
library.
The settings library Using the system
Choose a language for the system

Enter a system name

Physical interfaces Peripheral equipment

Next page...
Administrator Guide
Appendices Contact us
PREVIOUS: Step back.
NEXT: Step forward.
FINISH: Save changes
and restart the system.
CANCEL: Exit without
saving any changes.
20