Download Print this page
TANDBERG 880 MXP User Manual
Hide thumbs Also See for 880 MXP:

Advertisement

Tandberg 880
MXP
User Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the 880 MXP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TANDBERG 880 MXP

  • Page 1 Tandberg 880 User Guide...
  • Page 2 Tandberg 880 MXP If you are experiencing problems, please call Questmark on 0115 946 7500...
  • Page 3 Tandberg 880 MXP Remote Control User Guide Questmark Limited Tel: 0115 946 7500 Park House Fax: 0115 946 7515 104 Derby Road VC Test Line: 0115 946 7501 Long Eaton VC Helpdesk:- 0115 946 7502 NG10 4LS...
  • Page 4 Videoconferencing Pre Meeting Checklist • Have you booked the room and equipment at all sites involved? • Have you booked ‘set up’ time to arrange the room as is needed and set any presets in the camera? • Have you confirmed all attendees are available at the date/time booked? •...
  • Page 5 Tandberg 880 MXP User Guide Turning the System on • Ensure the power supply is plugged into the mains and the system is turned on. . • If the system does not respond, make sure the system is switched on by using the On/Off switch located at the rear of the system.
  • Page 6: User Guide

    Tandberg 880 MXP User Guide Storing a pre-set • Moving the camera between people can be slow. Alternatively, you can pre-set camera views and move between them. • To set a new preset, press and hold the number key you want that particular camera position to be set at.
  • Page 7 Tandberg 880 MXP User Guide Making a video call - manually • To make a call, choose ‘Make a Call’ from the main menu. Enter the number manually in the input field and press the green connect key or choose ‘place video call’.
  • Page 8 Tandberg 880 MXP User Guide Ending a call 1. Press the key on the remote control or End Call from the main menu. 2. Press the red key on the remote control again or OK to confirm that you want to end the call Editing the directory •...
  • Page 9 Tandberg 880 MXP User Guide Connecting your PC During a videoconference you can send information from a PC to the far end. This can be done in two ways:- Option 1 - The information can be sent INSTEAD of your own image or Option 2 - The information can be sent AS WELL as your image.
  • Page 10 Tandberg 880 MXP User Guide Option 1:- Sending an image of you OR your PC • Press the button from the main menu- this will present a list for you to choose from (see below). • Press the Main Video button to change Main Video source and choose from the list presented. This will normally be the PC option.
  • Page 11 Tandberg 880 MXP User Guide Multisite calls. Making a multisite call (manually) • Press the green key on the remote or choose Make a Call from the Main Menu to open the Call Menu. • Choose Add Video Call from the menu line. An extra number field appears. Press the Add button until you have the desired number of participants (press Cancel inside an empty input field to delete the field).
  • Page 12 Tandberg 880 MXP User Guide Useful Buttons/Symbols. If you are experiencing any problems with your videoconferencing equipment, please contact the Questmark helpdesk on 0115 946 7500 Questmark Ltd - 8 - Tel No: 0115 9467500 104 Derby Road, Long Eaton,...