TANDBERG MXP F8 Administrator's Manual page 23

MXP
Contents Introduction
Verify your settings
Press any button on the remote control to wake up the system. Navigate to
the System Information page, as described below, to verify the settings.
In the Diagnostics menu, press
the System Information button.
D14033.06—AUGUST 2010
Getting started Getting started The menu structure The settings library
In the Call menu, press the
Control Panel button.
Using the system Physical interfaces
Description of the settings
Each setting is described in in
Press The settings library
the page to go the settings library or use the search
functionality in the Adobe Acrobat PDF document to
make a search for the setting.
In the Control Panel menu,
press the Diagnostics button.
Verify your settings in the System Information page.
Administrator Guide
Peripheral equipment Appendices
PREVIOUS: Step back.
The settings library.
NEXT: Step forward.
menu button on top of
FINISH: Save changes
and restart the system.
CANCEL: Exit without
saving any changes.
Click on arrow
down/up to scroll.
Contact us
23