TANDBERG MXP F8 Administrator's Manual page 229

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > DETAILED CALL STATUS
Buttons > The Detailed Call Status menu provides detailed information on Audio, Video and DuoVideo in regards to
Packet Loss, Jitter and Packets dropped.
DIAGNOSTICS
The menu has two columns, one for transmitted and one for received audio/video/data information.
Control Panel > SYSTEM SELFTEST
The system performs a check to determine internal hardware integrity.
Buttons >
System Selftest is useful when you want to check if your network connection is active.
DIAGNOSTICS
Control Panel > VIEW ADMINISTRATOR SETTINGS
Buttons > This window displays all the system settings. The system settings available will vary depending on what
software options are installed.
DIAGNOSTICS
Use the Arrow keys on the remote control to scroll through the list.
Control Panel > IP ADDRESS CONFLICT CHECK
The system will give a warning if there is an IP conflict.
Buttons >
To initiate the check you select
DIAGNOSTICS
Control Panel > IP NETWORK QUALITY WARNINGS
•
Buttons > The system is experiencing 5% or higher, packet loss in the IP network. This will affect the quality of the
call.
Diagnostics >
•
The system is experiencing high jitter (i.e. 200 ms or higher) in the IP network. This may affect the quality
WARNINGS
of the call.
•
The system is dropping IP packets due to latency in the network. This may affect the quality of the call.
Control Panel > H.323 GATEKEEPER WARNINGS
•
Buttons > Could not register to the Gatekeeper.
•
The Gatekeeper rejected the registration attempt. Another system is already registered with the same alias
Diagnostics >
or H.323 ID.
WARNINGS
•
The max capacity on the Gatekeeper is reached. Registration failed.
•
Tried to register to the Gatekeeper without a valid alias. Registration failed.
•
The system is not allowed to register with this Gatekeeper.
•
Can not find the Gatekeeper. Check the Gatekeeper configurations on the system.
D14033.06—AUGUST 2010
Getting started The menu structure The settings library The settings library
IP ADDRESS CONFLICT CHECK
Using the system Physical interfaces
from the Diagnostics menu.
Peripheral equipment Appendices
INFORMATION
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
Administrator Guide
Contact us
PRODUCT
All MXP
systems
All MXP
systems
All MXP
systems
All MXP
systems
All MXP
systems
All MXP
systems
using a
Gatekeeper
229