Using The Remote Control - TANDBERG C90 System Integrator Manual

Codec C90
Contents Introduction Getting Started
Contents Introduction Getting started Getting started

Using the Remote Control

The functions keys
in the upper part of
the remote control
reflects the soft keys
on screen.
... and the middle
part of the remote
control is used to
handle the video
part of the call.
... while the lower
part of the remote
control resembles
very much the
keypad of a mobile
phone
Batteries
Make sure the remote control has
working batteries (4 x AAA batteries).
D14128.03—JULY 2009
Interfaces About the API
Interfaces About the API
FUNCTION KEYS: Each key reflects
a soft key on screen and represents
shortcuts and advanced functions.
MICROPHONE: Press the
Microphone key to toggle
the microphones on/off.
VOLUME: Press
the + or – on the
Volume key to adjust
the codec volume.
MUTE: Press the – to
mute an incoming call.
xConfiguration xConfiguration xCommand
xCommand xStatus
ARROW LEFT:
the left
to go one step back
in the menu or to
move to the left in a
text field.
PRESENTATION: Press the
Presentation key to show/hide
a presentation.
PHONE BOOK:
the Phone Book key to
display the local phone
book.
ZOOM: Press
the + or – on the Zoom
key to zoom the camera
in and out.
System Integrator Guide
xStatus Cameras Appendices
Cameras Appendices
ARROW UP/DOWN: Use
the up and down
arrow keys to navigate in
the menu.
Press
arrow key
OK/SELECT:
Select key to confirm your
choice or selection.
Press
HOME: Press the
Home key to go back
to the main menu.
Contact us
Contact us
ARROW RIGHT: Press
the right arrow key
to expand the selected
menu item or to move
to the right in a text
field.
Press the OK/
LAYOUT: Press the Layout
key to display the layout
menu, then select a view
in the menu.
10