TANDBERG MXP F8 Administrator's Manual page 168

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > ASPECT RATIO TV 1
General > CLIP: Adjust the source by clipping it, to match the aspect ratio of the destination window.
Screen Settings > LETTERBOX: Adjust the source by adding black bars, to match the aspect ratio of the destination window.
FILL: Stretch/shrink the source to fill the destination window. The aspect ratio of the source does not match
ASPECT RATIO
the destination.
AUTO: Automatically make the best choice by combining Clip, Fill and Letter box when necessary.
Control Panel > ASPECT RATIO TV 2
General > CLIP: Adjust the source by clipping it, to match the aspect ratio of the destination window.
Screen Settings > LETTERBOX: Adjust the source by adding black bars, to match the aspect ratio of the destination window.
ASPECT RATIO FILL: Stretch/shrink the source to fill the destination window. The aspect ratio of the source does not match
the destination.
AUTO: Automatically make the best choice by combining Clip, Fill and Letter box when necessary.
ASPECT RATIO DVI 1
Control Panel >
CLIP: Adjust the source by clipping it, to match the aspect ratio of the destination window.
General >
Screen Settings > LETTERBOX: Adjust the source by adding black bars, to match the aspect ratio of the destination window.
ASPECT RATIO FILL: Stretch/shrink the source to fill the destination window. The aspect ratio of the source does not match
the destination.
AUTO: Automatically make the best choice by combining Clip, Fill and Letter box when necessary.
Control Panel > ASPECT RATIO DVI 2
CLIP: Adjust the source by clipping it, to match the aspect ratio of the destination window.
General >
LETTERBOX: Adjust the source by adding black bars, to match the aspect ratio of the destination window.
Screen Settings >
ASPECT RATIO FILL: Stretch/shrink the source to fill the destination window. The aspect ratio of the source does not match
the destination.
AUTO: Automatically make the best choice by combining Clip, Fill and Letter box when necessary.
Control Panel > MONITOR BRIGHTNESS
General > 1700 MXP: Use the arrow keys to adjust the Monitor Brightness level (Value: 0 - 7)
3000 MXP Profile: Use the arrow keys to adjust the Monitor Brightness level (Value: 0 - 100)
SCREEN SETTINGS
Control Panel > MONITOR CONTRAST
General > 1700 MXP: Use the arrow keys to adjust the Monitor Contrast level (Value: 0 - 15)
SCREEN SETTINGS 3000 MXP Profile: Use the arrow keys to adjust the Monitor Contrast level (Value: 0 - 100)
D14033.06—AUGUST 2010
Getting started The menu structure The settings library The settings library Using the system Physical interfaces Peripheral equipment
INFORMATION
This setting applies to 1700 MXP
This setting applies to 3000 MXP Profile shipped without a
separate remote control for the monitor.
This setting applies to 1700 MXP
This setting applies to 3000 MXP Profile shipped without a
separate remote control for the monitor.
Administrator Guide
Appendices Contact us
PRODUCT
See
comment
See
comment
168