Advertisement
The Remote Control
System Configuration
1. Open the Administrator Settings menu
Choose 'Control Panel' from the main menu. In
'Control Panel', select 'Administrator Settings' and
press OK.
2. Language
Open 'General'. Select language and press 'Save'.
3. ISDN Configuration
Open 'Network - ISDN-BRI Settings'. Make ISDN
configuration and press 'Save'.
D13751.01 Page 2
1. Mic off: Mute and unmute the microphone.
2. Arrow keys: Navigate in menus or move camera.
3. Volume: Adjust the volume up and down.
4. Layout: Change picture layout on the screen.
5. Cancel: Go one step back or close menu.
6. Call: Press Call to start calling.
7. Presets: Activate presets in a call.
8. Snapshot: Send a snapshot in a call.
9. Presentation: Show PC (default).
10. OK/Menu: Navigate in menus.
11. Zoom: Zoom camera in and out.
12. Selfview: Show outgoing video picture (yourself).
13. Phone Book: Open Phone Book.
14. End Call/Standby: End call or go to standby.
15. Number keys: Dial a number.
16 Touch Tones: Press Touch Tones in a call to dial
extension numbers e.t.c.
If the menu is not already present, press the
OK/Menu key on the remote control to open
the menu. Navigate the menu with arrow keys
and OK. Go one step back with the Cancel
key. Close all menus by pressing Cancel for 1
second.
Please read the user manual
for further details.
4. LAN Configuration
Open 'Network -LAN Settings'. Make IP/H.323
settings and press 'Save'.
Advertisement
