TANDBERG MXP F8 Administrator's Manual page 180

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > CAMERA TRACKING
Menu Settings > The Camera Tracking icon indicates that the camera is zooming in on a single person speaking.
ICONS ON: Enables the Camera Tracking indicator. When the camera zoom in on a single person speaking the
indicator will be shown
OFF: Disables the Camera Tracking indicator. When the camera zoom in on a single person speaking no
indicator will be shown
Control Panel > HEADSET
Applies to systems with a headset input.
Menu Settings >
TANDBERG 1000 MXP: Connect the headset and activate the headset by pressing the button in front,
ICONS
located below the TANDBERG logo. Deactivate the headset by pressing the button once more.
TANDBERG 1700 MXP: The headset is activated by default when the connectors are connected. The
headset can be deactivated by pressing the button placed above the connectors. Press the button once
more to activate the headset.
ON: Enables the Headset indicator. When a headset is connected the Headset indicator will be shown.
OFF: Disables the Headset indicator. When a headset is connected no Headset indicator will be shown.
Control Panel > WARNINGS
Menu Settings > The Warning indicator will display when there is a warning. The Warning indicator is enabled by the system
and cannot be turned Off.
ICONS
Control Panel > PRESENTATION START
Presentation Settings > If your system has the optional Dual Stream capabilities, you can show two video streams simultaneously, i.e.
both video and a presentation. Dual Stream requires the Presenter Option and H.263 video. To check which
options are installed, see the System Information menu from the Diagnostics menu.
AUTO: When you start a presentation the Dual Stream will start automatically (i.e. when you choose a second
video source). If your system or the far end system cannot handle DuoVideo/H.239, you will not be using
Dual Stream, but rather send the presentation source as your Main Video.
MANUAL: When you start a presentation the Dual Stream must be started manually. To do so, select
Presentation in the Call Menu and select Start Presentation. Then choose a video source from the list on
the screen.
Control Panel > H.239
Presentation Settings > H.239 supports transmission of two video streams. It combines elements of DuoVideo and People+Content.
If H.239 is disabled you will still be able to start TANDBERG Dual Stream.
ENABLED: Enables the H.239 protocol.
DISABLED: Disables the H.239 protocol.
D14033.06—AUGUST 2010
Getting started The menu structure The settings library The settings library Using the system Physical interfaces Peripheral equipment
INFORMATION
About Dual Stream and Bandwidth
Using Dual Stream, the quality automatically downspeeds to
the optimal bandwidth. This means that you need higher quality
to allocate enough bandwidth for the two video streams. Dual
Stream borrows bandwidth from main video stream. When
Dual Stream is closed, the bandwidth is returned to the main
video.
Administrator Guide
Appendices Contact us
PRODUCT
All MXP
systems
with
controllable
camera
except 550
All MXP
systems
with a
headset
All MXP
systems
All MXP
systems
All MXP
systems
180