TANDBERG MXP F8 Administrator's Manual page 197

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > AUDIO LEVELING (AGC)
Audio > AGC - Automatic Gain Control of Mics, AUX, VCR and Received Audio.
AUDIO LEVELING The AGC (Automatic Gain Control) controls the audio level from MICs, AUX, VCR and Received Audio so that
strong signals are attenuated and weak signals are amplified. This makes it easier to hear all participants in a
conference.
ON: Set Audio Leveling On to allow automatic adjustments (Automatic Gain Control) of the audio levels from
Mics, AUX, VCR and Received Audio.
When On, the AGC maintains the audio signal level at a fixed value by attenuating strong signals and
amplifying weak signals. Very weak signals, i.e. noise alone, will not be amplified.
OFF: Audio Leveling is not activated.
When applying a weak signal in the presence of strong background noise, the AGC might amplify the
background noise as well as the signal. Therefore, in noisy environments, it is advisable to turn the AGC
off.
Control Panel > VIDEO CALL ALERT TONE
Audio > Lets you choose tone that will sound when you have an incoming video call.
ALERT TONES & VOLUME Use the vertical Arrow keys on the remote control to move up and down in the Alert tone list. Press OK to
listen to the alert tone selected. To stop playing the alert tone, use the vertical Arrow keys to move away from
the menu item.
Upon leaving the entire menu, you will be prompted to confirm any changes you may have made.
TELEPHONE ALERT TONE
Control Panel >
Lets you choose tone that will sound when you have an incoming audio call..
Audio >
ALERT TONES & VOLUME Use the vertical Arrow keys on the remote control to move up and down in the Alert tone list. Press OK to
listen to the alert tone selected. To stop playing the alert tone, use the vertical Arrow keys to move away from
the menu item.
Upon leaving the entire menu, you will be prompted to confirm any changes you may have made.
Control Panel > ALERT VOLUME
Audio > Set the volume (0-15) of the Alert signals.
ALERT TONES & VOLUME
Control Panel > ALERT SPEAKER
For systems with an internal alert speaker the speaker can be turned On/Off.
Audio >
ON: The internal speaker will warn you of an incoming call, even though the monitor may not be switched on.
ALERT TONES & VOLUME
OFF: The internal speaker is switched off.
D14033.06—AUGUST 2010
Getting started The menu structure The settings library The settings library Using the system Physical interfaces Peripheral equipment
INFORMATION
In most conferences, the participants will speak at different
levels, and be at different distances from the microphones. As
a result, some of the participants will be harder to hear than
others.
The AGC (Automatic Gain Control) corrects this problem by
automatically increasing the microphone levels when "quiet"
or "distant" people speak, and by decreasing the microphone
levels when "louder" people speak.
TIP! To ensure correct behavior of the AGC (Automatic Gain
Control), it is crucial that the levels on the input connectors are
adjusted correctly using the audio input level settings. The AGC
will not compensate for severe maladjustment of input levels.
TIP! To make it easy to distinguish between incoming video
calls and ordinary telephone calls, we recommend the use of
different ringing tones for video and telephone calls.
TIP! To make it easy to distinguish between incoming video
calls and ordinary telephone calls, we recommend the use of
different ringing tones for video and telephone calls.
Administrator Guide
Appendices Contact us
PRODUCT
8000
6000
3000
Tactical
Maestro
990/880/
770
95/85/75
All MXP
systems
All MXP
systems
All MXP
systems
8000
6000
Maestro
3000
Tactical
990/880/
770550
95/85/75
197