Video Sockets - TANDBERG MXP F8 Administrator's Manual

MXP
Contents Introduction
Codec 6000 MXP Interfaces and sockets, cont...

Video sockets

S-video input
Main camera
The system will automatically
adapt to a PAL or NTSC
input.
Single Dual
S-video output
Mini-DIN sockets
DVI-I pin-out
Note: TANDBERG supports
DVI-D Single-Link, DVI-A and DVI-I
Single-Link format cables.
DVI-D cables transmit digital
T.M.D.S. signals, DVI-A cables
transmit analogue VGA signals and
DVI-I cables can transmit either
digital or analogue signals.
If your DVI cable is not long
enough, use extension cables. Ob-
serve, however, that the maximum
cable length should not exceed
5 m to avoid quality loss.
D14033.06—AUGUST 2010
Getting started The menu structure
Composite video input
Mini-DIN sockets
Aux. camera Doc. camera
Single Dual
Composite video output
RCA sockets
DVI-I Pin-out
Pin Assignment Pin Assignment
1 T.M.D.S. Data 2– 9 T.M.D.S. Data 1–
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+
3 T.M.D.S. Data 2/4 11 T.M.D.S. Data 1/3
Shield Shield
4 T.M.D.S. Data 4– 12 T.M.D.S. Data 3–
5 T.M.D.S. Data 4+ 13 T.M.D.S. Data 3+
6 DDC Clock 14 +5 V power
7 DDC Data 15 GND
(return for +5 V,
HSync and Vsync)
8 Analogue Vertical 16 Hot plug detect
Sync
C1 Analogue Red C2 Analogue Green
C4 Analogue C5 Analogue GND
Horizontal Sync (analogue
R, G & B return)
The settings library Using the system
PC DVI-I input
RCA sockets
(Digital Visual Interface,
VCR
Single Dual
DVI output
sockets
Formats supported on DVI-I out:
SVGA (800 × 600) 75 Hz
XGA (1024 × 768) 60 Hz
Pin Assignment
SXGA (1280 × 1024) 60 Hz
HD720p (1280 × 720) 50 Hz, 60 Hz
WXGA (1280×768) 60 Hz
17 T.M.D.S. Data 0–
18 T.M.D.S. Data 0+
Formats supported on DVI-I in:
19 T.M.D.S. Data 0/5
SVGA (800 × 600) 60 Hz, 72 Hz, 75 Hz, 85 Hz
Shield
XGA (1024 × 768) 60 Hz, 70 Hz, 75 Hz
20 T.M.D.S. Data 5–
SXGA (1280 × 1024) 60 Hz
21 T.M.D.S. Data 5+
HD720p (1280 × 720) 50 Hz, 60 Hz
22 T.M.D.S. Clock
WXGA (1280x768, 1280x800, 1360x768,
Shield
1366x768 (@60 Hz))
23 T.M.D.S. Clock+
Do as follows to get WXGA:
1 VGA Out Quality
2 VGA Monitor Format
24 T.M.D.S. Clock–
3 PC Picture Format
C3 Analogue Blue
If you are using TANDBERG supplied monitors this will give WXGA out
when displaying graphics.
If non-TANDBERG provided displays are used, you must in addition
execute the command:
xConfiguration Video Outputs AllowWXGA: On
Physical interfaces Physical interfaces Peripheral equipment
sockets Note that the S-Video/Composite outputs on the Co-
dec 6000 MXP are by default turned off from factory.
Integrated digital
and analogue)
Levels
Composite: 1 Vpp, 75 W
S-Video (Y/C):
Y: 1 Vpp, 75 W
C (PAL): 0.3 Vpp, 75 W
C (NTSC): 0.28 Vpp, 75 W
must be set to Auto.
must be set to Wide.
must be set to Normal.
Administrator Guide
Appendices Contact us
S-video Mini-DIN pin-out
External view of socket
4
3
2
1
Pin 1: Ground (Luminance)
Pin 2: Ground (Chrominance)
Pin 3: Luminance (Y)
Pin 4: Chrominance (C)
RCA pin-out
External view of socket
Signal GND
261