TANDBERG MXP F8 Administrator's Manual page 177

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > ALLOW USE OF REMOTE CONTROL
Menu Settings > ON: All keys on the remote control are enabled.
KIOSK MODE SETTINGS OFF: All keys except the arrow keys and OK key are disabled.
ONE CLICK CONNECT
Control Panel >
ON: When turned On, you can make a call with a single click on the green call button on the remote control.
Menu Settings >
The system will call the first entry in "My Contacts" in the Phone Book.
KIOSK MODE SETTINGS
NOTE:
OFF: Does not allow for one click connect.
Control Panel > PHONE BOOK
Menu Settings > Your system may be connected to a Directory Service or Management System such as the TANDBERG
Management Suite (TMS). The Management System may then provide your video system with a phone
KIOSK MODE SETTINGS
book containing a corporate directory. This directory is controlled directly from the Management System and
updates and changes are carried out remotely by the Management System Administrator.
LOCAL: Select Local to make only the local Phone Book available for the user in Kiosk Mode.
CORPORATE DIRECTORY: Select Corporate Directory to make the Corporate phone book available for the
user in Kiosk Mode. This opens up for remote updates of the phone book.
Control Panel > KIOSK MENU
Menu Settings > ON: The Kiosk Mode menus will appear on the screen.
KIOSK MODE SETTINGS OFF: No menus or indicators will appear on the screen.
Control Panel > WELCOME MENU
ON: The Welcome Menu is shown when the system wakes up from standby mode.
Menu Settings >
OFF: The Welcome Menu is not shown when the system wakes up from standby mode. Press the OK button
STARTUP
to open the Welcome Menu.
WELCOME PICTURE
Control Panel >
Menu Settings > SELFVIEW: is shown in the background of the welcome menu. In most cases this means that main camera
is displayed and you can see the video image of yourself.
STARTUP
OFF: No picture is shown in the background of the welcome menu.
Control Panel > LOGO
Menu Settings > ON: The company logo will appear in the background of the welcome menu.
OFF: No logo is displayed.
STARTUP
Note! The TANDBERG Logo will be displayed if no other company logo is loaded and Logo is set to On.
D14033.06—AUGUST 2010
Getting started The menu structure
This functionality will only work in Kiosk Mode
The settings library The settings library Using the system Physical interfaces Peripheral equipment
INFORMATION
TIP! When Use Screen as Local PC Monitor is set to On you
can set the Welcome Menu to Off. This will avoid the Welcome
menu to automatically appear on screen. Press the OK button
on the remote control to see the Welcome menu.
The WELCOME PICTURE is what you see in the background of
the welcome menu.
It is possible to upload a company logo to the system. For more
information about how to upload a logo, see
Own Logo in the USING THE SYSTEM
Administrator Guide
Appendices Contact us
PRODUCT
All MXP
systems
All MXP
systems
All MXP
systems
All MXP
systems
All MXP
systems
All MXP
How to Apply Your systems
section.
177