Sharing A Pc Presentation; Other Presentation Sources - TANDBERG MXP F8 Administrator's Manual

MXP
Contents Introduction

Sharing a PC presentation

General recommendations are described on the previous page.
Dual video stream
With dual video stream you can view two different live video streams
simultaneously, the main video and one additional source. This could
for example be both a PC presentation and the person who gives the
presentation.
If one of the video systems does not support Dual Video Stream, no
second video stream will be established and the PC presentation will be
shown as the main video.
Sharing the presentation
1. Make sure the PC do not cover any of the microphones as this will
reduce the audio quality at the far end
2. Locate the DVI cable and connect the PC to the video system
3. When pressing the Presentation button on the remote control the
default presentation source is activated.
The DVI/VGA input is compliant with VESA Extended Display
Identification Data (EDID) and will be able to notify the PC of the
supported output formats.
Troubleshooting if the presentation does not show
•
On most PC's you must press a special key combination to switch
the PC image from the PC screen to the video screen
•
Make sure your PC is set to activate your VGA output

Other presentation sources

You can also connect other presentation sources like:
•
DVD
•
Document camera
D14033.06—AUGUST 2010
Getting started The menu structure The settings library
The screen layout
Press the Layout button on the remote
control to select a suitable layout on
screen.
The default layout when showing a PC
presentation is designed to allow the
participants to keep eye contact with
each other during the presentation.
Using the system Using the system Physical interfaces Peripheral equipment
Administrator Guide
Appendices Contact us
Shows the PC presentation
and the participants
Connect the PC
and press the blue
Presentation key on
the remote control.
237