TANDBERG MXP F8 Administrator's Manual page 185

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > AAC-LD 128
Call Quality > Specify a call rate for stereo audio, AAC-LD 128 kbps (Advanced Audio Coding - Low Delay). To enable
stereo CD-quality audio you need to specify a call rate for which stereo automatically should be enabled:
•
From the specified call rate and above the stereo CD quality 128 kbps AAC-LD is available.
•
For lower call rates, mono CD quality 64kbps AAC-LD is available.
•
Make your selection from
Control Panel > DYNAMIC RESOLUTION
With Dynamic Resolution the system will use the optimal video resolution for the chosen bandwidth. This
Call Quality >
feature is only applicable to HD (high definition) calls.
AUTO: When set to Auto and in a HD call: the resolution will differ between the bandwidths 720p, 576p and
448p, dependent on how much motion it is in the picture. The call will start with 720p and change to a
lower resolution when there is a lot motion. It will go back to 720p with less motion.
OFF: Select Off to disable the Dynamic Resolution feature (the default setting)
Control Panel > MAX UPSTREAM RATE
The Max Upstream Rate (kbps) defines the desired maximum transmitted call rate over H.323 and SIP
Call Quality >
networks. In this way you can limit the outgoing (upstream/transmit) bandwidth whilst keeping the maximum
incoming (downstream/receive) bandwidth.
Enter the max upstream rate in kbps for your system.
D14033.06—AUGUST 2010
Getting started The menu structure The settings library The settings library
384 kbps and above up to 1920 kbps and
Using the system Physical interfaces
INFORMATION
NOTE!
video systems based on the bandwidth available.
NOTE!
audio. See
Stereo audio requires twice the bandwidth as mono CD-quality
audio. We recommend enabling stereo audio on high call rates
above.
only.
Stereo audio can be received and listened to from e.g. a VCR
or DVD, but only when the microphone has been set to Off
(press Mic Off on the remote control).
This feature is especially useful for home offices with different
transmit and receive rates, typically ADSL.
Administrator Guide
Peripheral equipment Appendices
The call rate selection may differ within the different
Stereo I/O mode needs to be enabled to get stereo
Stereo Settings for details.
Contact us
PRODUCT
All MXP
systems
with stereo
audio
All MXP
systems
All MXP
systems
185