TANDBERG MXP F8 Administrator's Manual page 209

MXP
Contents Introduction
MENU ADDRESS SETTINGS DESCRIPTION
Control Panel > H.331
Network > The H.331 Broadcast Mode decides the negotiation quality, dependent on if there is a one-way or two-way
communication.
ISDN > or
ON: Used when broadcasting a videoconference from one site to many others, e.g. via satellite, where
ISDN, External, Leased E1/T1 >
there is no possibility to negotiate quality between the receivers and the originator due to one-way
H.331 SETTINGS
communication.
OFF: Standard two-way communication with quality negotiation between both sides.
Control Panel > IP PROTOCOL
Network > The Internet Protocol (IP) settings are used for communicating data across a network.
Set which Internet Protocols are supported.
LAN Settings >
IPV4: IP version 4 supported.
IP SETTINGS
IPV6: IP version 6 supported. IP Address, IP Subnet Mask, and Gateway will be disabled.
BOTH: Both IP version 4 and IP version 6 supported.
Control Panel > IP ASSIGNMENT
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.
Network >
Note that for IPv6, the DHCP server is used for NTP and DNS Server Addresses.
LAN Settings >
IP SETTINGS DHCP: The system's adresses are automatically assigend by the DHCP server. Thereby the IP-address, IP-
subnet mask and Gateway are not used and grayed out.
STATIC: The system's IP-address, IP-subnet mask and Gateway must be specified in the respective address
fields.
Options available via DHCP
•
IP Address
•
Subnetmask
•
Gateway
•
DNS servers
•
NTP server
•
SIP server
•
MTU size, DHCP Option 26 (from F6)
•
External Manager
1. If the DHCP Option 242 is returned in the DHCP response from the DHCP server the system will
interpret this as the External Manager address to use.
2. Normally the External Manager Address will be the TMS address.
D14033.06—AUGUST 2010
Getting started The menu structure The settings library The settings library Using the system Physical interfaces Peripheral equipment
INFORMATION
RESTART SYSTEM AFTER CHANGES
Changes in IP Settings menu will have no effect until the system is
restarted.
RESTART SYSTEM AFTER CHANGES
Changes in IP Settings menu will have no effect until the system is
restarted.
Administrator Guide
Appendices Contact us
PRODUCT
Systems
with ISDN-
BRI or
ISDN-PRI
All MXP
systems
All MXP
systems
209