Figure 42 Select Tape Drive Screen - Tandberg Data MSERIES USER User Manual

Chapter 4 Performing Maintenance Operations
Cleaning a Tape Drive
Figure 42 Select Tape
Drive Screen
70
5 When the flashing arrow is next to the source element that contains
the cleaning cartridge, press
The GUI displays the
flashing arrow indicates the currently selected drive.
Tandberg Data
6 If the library is an M1500 in a multiple library stack or an M2500,
press the button to select the level where the drive that requires
Level
cleaning is located.
7 Press or
Drive 1 Drive 2
To cancel the operation, press
8 Press .
Select
The GUI displays the message
cleaning is done, the GUI displays the
screen again.
9 Press Back to return to the
Tandberg Data M-Series User's Guide
.
Select
screen (see
Select Tape Drive
.
.
Cancel
Cleaning in progress
Select Cleaning Cartridge
screen.
Maintenance
figure 42). A
. When the