Changing The Auto-Import Option - Tandberg Data MSERIES USER User Manual

Chapter 3 Changing the Library Configuration

Changing the Auto-Import Option

Changing the Auto-Import Option
66
The option controls how cartridges are moved from the
Auto-Import
import/export slots of the mailbox to the magazine slots:
• Enabling this option causes the library to move any cartridges in the
import/export slots to the first (lowest element address) free
magazine slots automatically. The move is performed automatically
(without need for host commands) at both power-up and whenever
the import/export magazine is inserted.
• Disabling this option removes the above capability; the host software
must issue SCSI commands to move cartridges from the import/
export slots to the required magazine slots.
To change the
Auto-Import
1 Access the
Configuration
Screen on page 49).
2 Press the or
Up Down
3 Press .
Select
4 Use the or
Up Down
The available settings are
5 Press .
Select
To return to the
Configuration
setting, press
Cancel
6 Press to return to the main screen.
Main
This setting takes effect when you reboot the library.
Note:
Tandberg Data M-Series User's Guide
setting:
screen (see Accessing the Configuration
buttons until
Auto-Import
buttons to select the desired
or
Enabled Disabled
screen without changing the option
.
is highlighted.
setting.
Auto-Import
(default).
3