Table of Contents
Advertisement
FSC
Name
262C
FSC_SERVO_X_AXIS_
SENSOR_FAILURE
262D
FSC_SERVO_Y_AXIS_
SENSOR_FAILURE
262E
FSC_SERVO_PICKER_
CALIBRATION_ERROR
262F
FSC_SERVO_X_
FRICTION_TOO_HIGH
2630
FSC_SERVO_Y_
FRICTION_TOO_HIGH
2631
FSC_SERVO_THETA_
FRICTION_TOO_HIGH
2632
FSC_SERVO_PICKER_
FRICTION_TOO_HIGH
2633
FSC_SERVO_Z_
CALIBRATION_ERROR
2634
FSC_SERVO_
MAGAZINE_
PARTIALLY_INSERTED
2635
FSC_SERVO_Z_
FRICTION_TOO_HIGH
Appendix B Fault Symptom Code (FSC) Dictionary
Description
The X axis sensor could
not be detected
changing state
The Y axis sensor could
not be detected
changing state
The Picker axis did not
travel the minimum
distance when
calibrating
The X axis friction is
too high for normal
operation
The Y axis friction is
too high for normal
operation
The Theta axis friction
is too high for normal
operation
The Picker axis friction
is too high for normal
operation
The Z axis did not
travel the minimum
distance when
calibrating
The inserted magazine
has not been pushed
fully home
The Z axis friction is
too high for normal
operation
Tandberg Data M-Series User's Guide
FRU Name
Confidence %
127
Advertisement
Table of Contents
Need help?
Do you have a question about the MSERIES USER and is the answer not in the manual?
Questions and answers