Table of Contents
Advertisement
Chapter 3 Changing the Library Configuration
Changing the Short Labels Setting
Changing the Short Labels Setting
Changing the Illumination Setting
58
The
option controls how many bar code label characters are
Short Labels
returned when the host issues a
is set to:
Short Labels
•
, all of the bar code label characters are returned
Off
•
, only the first six characters of the bar code label are returned
On
To enable or disable
Short Labels
1 Access the
Configuration
Screen
on page 49).
2 Press the
or
Up
Down
3 Press
.
Select
4 Use the
or
Up
Down
The available settings are
5 Press
.
Select
6 To return to the
Configuration
setting, press
Cancel
7 Press
to return to the main screen.
Main
The
option allows you to turn the interior illumination of the
Illumination
library on or off. This illumination allows you to view the robotics easily
through the viewing window.
To enable or disable
Illumination
1 Access the
Configuration
Screen
on page 49).
2 Press the
or
Up
Down
3 Press
.
Select
Tandberg Data M-Series User's Guide
Read Element Status
:
screen (see
Accessing the Configuration
buttons until
Short Labels
buttons to select the desired
and
Enabled
Disabled
screen without changing the option
.
:
screen (see
Accessing the Configuration
buttons until
Illumination
3
command. When
is highlighted.
setting.
Short Labels
(default).
3
is highlighted.
Advertisement
Table of Contents
Need help?
Do you have a question about the MSERIES USER and is the answer not in the manual?
Questions and answers