Table of Contents
Advertisement
Updating the Drive Firmware from Tape
Figure 58 Select
Firmware Cartridge
Screen
To update the drive firmware from tape:
1 Insert the drive firmware cartridge into the library and move it to the
desired storage element (see
page 30).
2 Access the Service Drive screen (see
Screen).
3 Press
.
Update
The GUI displays the
A flashing arrow indicates the currently selected source element.
Tandberg Data
4 If the library is an M1500 in a multiple library stack or an M2500,
press the
button to select the level where the drive firmware
Level
cartridge is located.
5 Press the
and
Up
Down
contains the drive firmware cartridge.
6 When the flashing arrow is next to the source element that contains
the drive firmware cartridge, press
The GUI displays the
flashing arrow indicates the currently selected drive.
Tandberg Data M-Series User's Guide
Chapter 6 Updating Drive Firmware
Updating the Drive Firmware from Tape
Importing and Exporting Cartridges
Accessing the Service Drive
Select Firmware Cartridge
buttons to select the source element that
.
Select
screen (see
Select Tape Drive
6
on
screen (see
figure
58).
figure
59). A
89
Advertisement
Table of Contents
Need help?
Do you have a question about the MSERIES USER and is the answer not in the manual?
Questions and answers