Tandberg Data MSERIES USER User Manual page 142

Appendix B Fault Symptom Code (FSC) Dictionary
FSC Name
2623 FSC_SERVO_
CARTRIDGE_STILL_
LATCHED
2624 FSC_SERVO_CLEANER_
SLOT_NOT_ACCESSIBLE
2625 FSC_SERVO_SHUTTLE_
NOT_CALIBRATED
2626 FSC_SERVO_THETA_
CALIBRATION_ERROR
2627 FSC_SERVO_X_
CALIBRATION_ERROR
2628 FSC_SERVO_Y_
CALIBRATION_ERROR
2629 FSC_SERVO_PICKER_
JAM_RECOVERED
262A FSC_SERVO_THETA_
SENSOR_0_FAILURE
262B FSC_SERVO_THETA_
SENSOR_1_FAILURE
126
Description
The cartridge is still
being retained by the
drive
The (NVR spec'd) XY
build does not provide
access to the cleaner
slot
The shuttle's vertical
position is still
unknown
The Theta angles are
out of specification
after calibration
attempt
The X axis did not
travel the minimum
distance when
calibrating
The Y axis did not
travel the minimum
distance when
calibrating
Picker jam occurring,
being recovered, but
retry now exhausted
The Theta sensor
closest to the RH
magazine failed to
switch
The Theta sensor
closest to the LH
magazine failed to
switch
Tandberg Data M-Series User's Guide
FRU Name Confidence %
XY 50%
NVR 50%